Additional Links

Bubblebee Spacer Kit

You save £18 ex Vat by getting The Spacer Kit, compared to buying the Spacer Bubble and the Long-Haired Spacer Cover separately.

The Bubblebee Spacer Kit gives you the weather protection you need to record sound with any shotgun mic, indoor or outdoor, in all kinds of wind. The Kit consists of 1 Spacer Bubble base, 1 short-haired fur cover, 1 bag to store and dry the fur in as well as 1 long-haired spacer cover to be used in harsh weather.

The Bubblebee Spacer Bubble is made up of a moulded rubber mount, mesh foam base and a slip-on fur sleeve for outdoor environments.

Available in seven sizes for all major shotgun microphone types: XS, S, M, L and XL, plus you can also get two models where the rubber mount has a larger diameter for Sennheiser MKH50 or similar: XS-M Big Mount and XL-M Big Mount.

See a full list of mics the Spacer Bubble will fit and which size to buy in the description below.

Buy Now

Product Description

The Bubblebee Spacer Bubble is a three-piece wind protection solution for both camera operators and sound mixers – and everyone in between. It comes in 7 sizes and is designed as a modular solution because this allows for quick transfer between indoor and outdoor situations, in almost any weather conditions.

The Bubblebee Spacer Kit includes the following:

  • 1 x Spacer Bubble base
  • 1 x short-haired fur cover
  • 1 x carry bag to store and dry the fur in
  • 1 x long-haired spacer cover to be used in harsh weather

The ingenious shotgun microphone windshield is constructed of a noise-free mesh base, with a coarse foam inside and our specially designed rubber mount at the bottom. The combination of the foam and the mesh means you get the perfect conditions for recording indoors, while if you suddenly have to act fast and move to outside situations, the addition of the short-haired or lond-haired fur slip-on (both included in the kit) gives you perfect audio transparency in almost any weather conditions within seconds.

The Spacer Kit features:

  • Be prepared for ALL kinds of wind in just seconds.
  • Switch locations fast and always get the best transparency while blocking the wind noise.
  • Specially designed rubber base for super easy and secure mounting.
  • Base windshield made from highly efficient mesh.
  • Slip-on fur made from Bubblebee Industries’ best imitation fur (high amount of hair pieces per cm2) which allows for optimal frequency transparency.
  • Quick drying of the fur if it gets wet. You can just place it in the mesh bag.
  • Comes in seven different sizes – sure to find a size that perfectly fits your favorite shotgun mic.
  • Save valuable time while getting best quality.
  • Practical mesh bag included for easy storage and fast mounting.
  • Designed in Denmark by sound lovers, for sound lovers.

When your recording is wrapped, you can always keep track of your Spacer Bubble by collecting the base and the fur slip-on in the included practical mesh storage bag. In that way you’ll always have your Spacer Bubble right where you need it.

Will it fit my mic? Most likely:

Here is a list of the sizes and which microphones they fit. If you’re not sure please get in touch and we’ll sort it out.

XS Length: 79mm
Audio Technica AT4053
Audix SCX1C
DPA d:dicate™ 4006A, 4011A, 4018A
Neumann KM Series
Røde NT55
Schoeps CMC Series
Sennheiser ME64 & 62 K6
S Length: 128mm
JVC Camera Mic
Sony Camera Mic
M Length: 154mm
Audio Technica AT877 & AT4073
DPA d:dicate™ 4017B
Sanken CS1
MKH 8060
Schoeps CMIT 5U
L length: 179mm
Audio Technica AT835-ST & AT897
Neumann KMR 81
Røde NTG-1 & NTG-2
Sanken CS 2
Schoeps Super CMIT 5
XL Length: 204mm
Røde NTG-3
Sanken CS 3 & CSR-2
Sennheiser ME 66 & MKH 416

 
The Bubblebee Spacer Bubble is also available with the new “M” rubber mount, with a larger diameter to better fit mics like the Sennheiser MKH50 or MKH60.

XS – Big Mount Length: 55mm, Diameter: 23mm-26mm
Sennheiser MKH30
Sennheiser MKH40
Sennheiser MKH50
XL – Big Mount Length: 180mm, Diameter: 23mm-26mm
Sennheiser MKH60

See the first BBI Spacer Bubble in action at IBC2016

Reviews

There are no reviews yet.

Be the first to review “Bubblebee Spacer Kit”

Time limit is exhausted. Please reload CAPTCHA.

You may also like…