Additional Links

DPA CORE 6060 Subminiature Omnidirectional Lavalier Microphone, Normal SPL

The DPA CORE 6060 Subminiature Lavalier Microphone is just three millimetres in diameter – two millimetres smaller than DPA’s existing 4000 series of miniature microphones. Despite its unobtrusive size, it’s exceptionally clear, consistent and highly durable.

  • – Amazingly tiny 3mm capsules
  • CORE by DPA technology
  • – Renowned DPA sound

DPA have taken their new CORE by DPA technology that reduces distortion and increases dynamic range and shrunk it down to fit into the DPA 6060’s 3mm (.12 in) subminiature Microphone capsule, meaning you don’t have to compromise on sound to focus on the size and aesthetics.

This Microphone is available in four colours: black, brown, beige and white.

Where to buy

Product Description

The DPA 6060 (Normal SPL) is an omnidirectional microphone that carries a frequency range of 20 Hz – 20 kHz and has a noise floor of only 24 dB(A). It’s well suited for capturing speech and can also be used to close Microphone a wide range of instruments.

This subminiature Microphone outperforms all other mics in their class with a lower noise floor than any other 3 mm capsule on the market.

Stainless steel construction makes the mics in the 6000 series extremely durable. They can tolerate high temperatures and they’re resilient against impacts and resistant to abrasion. The subminiature mics use the same size cable as on DPA’s 5 mm mics. The cables are extremely durable, do not become entangled and withstand rough pulls.

All CORE by DPA Microphones are now IP58 Rated for water and dust ingress

DPA CORE 6060 Subminiature Lavalier Microphone

Directional pattern Omnidirectional
Principle of operation Pressure
Cartridge type Pre-polarized condenser
Frequency response 20 Hz – 20 kHz
Effective frequency range ±2 dB 40 Hz – 20 kHz with 4 dB soft boost at 8 – 20 kHz
Sensitivity, nominal, ±3 dB at 1 kHz 20 mV/Pa; -34 dB re. 1 V/Pa
Equivalent noise level, A-weighted Typ. 24 dB(A) re. 20 μPa (max. 26 dB(A))
Distortion, THD < 1% 123 dB SPL RMS, 126 dB SPL peak
Dynamic range Typ. 102 dB
Max. SPL, THD 10% 134 dB SPL peak
Rated output impedance From MicroDot: 30 – 40 Ω. From DAD6001-BC: 100 Ω
Cable drive capability Up to 300 m (984 ft) with DAD6001-BC XLR adapter
Power supply (for full performance) Min. 5 V to max. 10 V through DPA adapter for wireless systems. With DAD6001-BC: 48 V phantom power ±4 V for full performance. Works from 12V
Connector MicroDot, TA4F Mini-XLR, 3-pin LEMO, Mini-Jack
Color Black or beige
Weight 8 g (0.29 oz) incl. Cable and MicroDot connector
Microphone head size (h x w x d) 3.4 / 14.4 mm (0.13 / 0.57 in)
Capsule diameter 3 mm (0.12 in)
Cable length 1.8 m (5.9 ft)
Polarity Positively increasing sound pressure produces positive going voltage on MicroDot pin
Temperature range -40°C to 45°C (-40°F to 113°F)
Relative humidity (RH) Up to 90%


You may also like…