Additional Links

DPA d:dicate™ ST4006A Omni Stereo Mic Pair

The DPA ST4006A Stereo kit comprises a matched pair of 4006 Omni Capsules fitted with 'A' type long pre-amps, all neatly packed in a sturdy Peli™ Case.

Stereo bar and a myriad of accessories including acoustic equalizers are available as accessories. The ST4006A Stereo Pair is the perfect stereo tool kit for the professional recordist.

Included in this kit
Two carefully matched 4006A omni microphones, sturdy Peli™ case, holders, grids and windscreens.

Where to buy

Product Description

The DPA ST4006A Omnidirectional Stereo Matched Pair of microphones is a complete DPA 4006A stereo pair with two of the finest carefully factory-matched omni microphones. Even though the standard tolerances on DPA Reference Standards are extremely low, a stereo match is even closer. The specially selected DPA 4006A microphones are matched within ±0.5 dB on both frequency response and sensitivity. The maximum phase response difference is 5°.

The natural sound, high sensitivity, low noise-floor and extremely linear frequency response from 10 Hz to 20 kHz (±2 dB) of the microphone pair makes the ST4006A the perfect choice for all AB Stereo recordings. The design in the heavy-duty transportation box allows for fast and easy exchange of microphone/accessory foam inlays.

All DPA d:dicate recording microphones come with a 5 year warranty.

DPA d:dicate™ 4006A Specifications

Open specifications

Directional characteristics: Omnidirectional
Principle of operation: Pressure
Cartridge type: Pre-polarized condenser
Frequency range: 10 Hz to 20 kHz
Frequency range, ± 2 dB: 10 Hz to 20 kHz
Sensitivity, nominal, ±2 dB at 250 Hz: 40 mV/Pa; -28 dB re. 1 V/Pa
Equivalent noise level, A-weighted: Typ. 15 dB(A) re. 20 µPa (max. 17 dB(A))
Equivalent noise level, ITU-R BS.468-4: Typ. 27 dB (max. 29 dB)
S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): Typ. 79 dB(A)
Total Harmonic Distortion (THD): < 1 % up to 139 dB SPL peak
Minimum load impedance: 2 kohm
Dynamic range: Typ. 124 dB
Max. SPL, peak before clipping: 147 dB
Switchable attenuator: 0 dB / -20 dB
Output impedance: < 200 ohm
Cable drive capability: 100 m (328 ft)
Output balance principle: Impedance balancing with Active Drive
Common Mode Rejection Ratio (CMRR): > 60 dB
Power supply (for full specifications): 48 V Phantom power (± 4 V)
Current consumption: 2.8 mA
Connector: XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: – phase
Color: Matte black
Weight: 163 g (5.7 oz)
Diameter: 16 to 19 mm (0.63 to 0.75 in)
Capsule diameter: 16 mm (0.63 in)
Length: 170 mm (6.7 in)
Output voltage, RMS: > 5 V
Polarity: +V at Pin 2 for positive sound pressure
Temperature range: -40 °C to 50 °C (-40 °F to 122 °F)
Relative Humidity (RH): Up to 90 %
Classification: Conforms to IEC 61672 Class I (with Near-field Grid DD0251)
Matching tolerance: ± 0.5 dB
Phase deviation for kit: < 5°

Reviews

There are no reviews yet.

Be the first to review “DPA d:dicate™ ST4006A Omni Stereo Mic Pair”

Time limit is exhausted. Please reload CAPTCHA.