Additional Links

DPA d:fine™ In-Ear (IEM) Broadcast Headset Mic, Dual-Ear

DPA’s latest addition to their d:fine™ range of Headset mics, the d:fine™ In-Ear Broadcast Headset Mic adds in-ear monitoring to the equation to create a remarkably comfortable and effective headset communication system with DPA’s industry-leading mic capsules.

The dual-ear mount with single or dual in-ear options is designed to be easy to fit with a very small visual footprint, while offering a complete communication solution tailored to your requirements.

Available now!

Where to buy

Product Description

The DPA d:fine™ In-Ear Monitor (IEM) Broadcast Headset Microphone, Dual-Ear mount, comes with either single or dual in-ear configuration incorporating one or two high-quality in-ear monitors discretely on the d:fine dual-ear headset mount. The headset’s minimalistic design form focuses on the wearer’s comfort and a modest visual footprint. The first of its kind, the d:fine In-Ear Broadcast Headset mic is aimed at broadcast professionals who expect superior voice reproduction without compromise, while having a dependable communication system incorporated.

As with the rest of the d:fine range, DPA’s new IEM Broadcast Headset Mics couple very low self-noise with extremely high sensitivity to deliver the clearest, most transparent and natural sound available from headset microphones today. The headset can be paired with any of DPA’s d:fine™ mic booms, omni, directional, ’66’ Omni or ’88’ Directional. To complete your DPA headset system, select a suitable DPA wireless adapter for seamless integration with your current wireless transmitter / receiver systems.

DPA d:fine™ In-Ear (IEM) Broadcast Headset Mic, Dual-Ear

Directional characteristics: Omnidirectional
Principle of operation: Pressure
Cartridge type: Pre-polarized condenser
Frequency range: 20 Hz – 20 kHz
Frequency range, ± 2 dB: 20 Hz – 20 kHz with 3 dB soft boost at 8 – 15 kHz
Sensitivity, nominal, ± 3 dB at 1 kHz: 6 mV/Pa; -44 dB re. 1 V/Pa
Equivalent noise level, A-weighted: Typ. 26 dB(A) re. 20 µPa (max. 28 dB(A))
Equivalent noise level, ITU-R BS.468-4: Typ. 38 dB (max. 40 dB)
S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): Typ. 68 dB(A)
Total Harmonic Distortion (THD): <1 % up to 123 dB SPL peak; <1 120 RMS sine
Dynamic range: Typ. 97 dB
Max. SPL, peak before clipping: 144 dB
Output impedance: From MicroDot: 30 – 40 ohm. From DAD6001-BC: 100 ohm.
Cable drive capability: Up to 300 m (984 ft) with DAD6001-BC XLR adapter
Output balance principle: Signal balanced with DAD6001-BC XLR adapter
Common Mode Rejection Ratio (CMRR): Common Mode Rejection Ratio (CMRR)
Power supply (for full performance): Min. 5 V to max. 50 V through DPA adapter for wireless systems. 48 V phantom power ± 4 V with DAD6001-BC XLR adapter.
Current consumption: Typ. 1.5 mA (microphone). 3.5 mA with DAD6001-BC XLR adapter.
Connector: MicroDot
Color: Black, beige, brown, lime
Weight: Microphone boom: 0.8 g (0.03 oz). Earhook: 1.1 g (0.04 oz). Cable: 6.6 g (0.23 oz). Total: 8.5 g (0.30 oz).
Microphone head size (h x w x d): 9.5 x 5.3 x 2.9 mm (0.37 x 0.21 x 0.11 in)
Capsule diameter: 5.4 mm (0.2 in)
Mic boom length: 110 mm (4.3 in)
Cable length: 1.3 m (4.3 ft)
Cable color: Black, beige, brown
Cable diameter: 1.6 mm (0.06 in)
Polarity: +V at MicroDot pin for positive sound pressure (and pin 2 on DAD6001-BC XLR adapter)
Electro Magnetic Compatibility (EMC): Fully compatible
Temperature range: -40 °C to 45 °C (-40 °F to 113 °F)
Relative Humidity (RH): Up to 90%
d:fine In-Ear Broadcast Headset (Specifications, In-Ear Drivers):
Type: Dynamic earplug (acknowledged Hi-Fi plugs)
Connector: 3,5 mm stereo Mini-Jack
Single In-Ear: Signal at Mini-Jack Tip
Dual In-Ear: Signal at Mini-Jack Tip (Left – mic boom side) and Ring (Right)
Sensitivity: 107 dB
Nominal impedance: 18 Ω
*: 2 sizes of Ear-adapters are included

DPA d:fine™ IEM Broadcast Headset Mic Instructional Video:

Reviews

There are no reviews yet.

Be the first to review “DPA d:fine™ In-Ear (IEM) Broadcast Headset Mic, Dual-Ear”

Time limit is exhausted. Please reload CAPTCHA.