Additional Links

DPA d:screet™ CORE 4060 Omni Lavalier Microphone

The DPA d:screet™ CORE 4060 Omnidirectional Lavalier Microphone is small, yet highly flexible, presenting an exceptionally accurate omnidirectional pattern.

Widely used in television and film, the DPA d:screet™ CORE 4060 Omni Lavalier Microphone (Normal SPL) is ideally suited for capturing speech. This microphone handles sound pressure levels up to 134 dB before clipping occurs. This mic is well suited for applications where the sound source is more remote or damped and you need to have a good balance signal versus noise

This mic is available in four colours: black, brown, beige and white.

Where to buy

Product Description

The DPA d:screet™ series is the world’s leading mic for speech and vocal performance and has become the industry standard microphone in live theatre and broadcast. Now in its next evolution, the d:screet CORE 4060 series of Miniature Omnidirectional Microphones bring extra clarity and detail to live speech and vocals, further distancing themselves from their competitors.

The DPA d:screet™ CORE 4060 Omnidirectional Lavalier Microphone was developed to withstand even the toughest of conditions in live performance, containing a 5.4 mm diameter pre-polarized condenser element with a vertical diaphragm.

The CORE by DPA d:screet™ 4060 is an omnidirectional microphone has sensitivity at all angles – which means it’s capable picking up sound equally from all directions.

A double vent protection system makes the mic greatly resistant to humidity and sweat, whilst its Kevlar-reinforced cable relief can withstand constant every-day twists, bends and pulls of any live performance. ­­Adding further flexibility, the microphone can be configured to run easily and effortlessly with a huge range of the industry’s proffered wireless systems, but if you prefer, the mics is available with an XLR adapter to run via a wired system.

DPA d:screet™ CORE 4060 Specifications

Directional pattern: Omnidirectional
Principle of operation: Pressure
Cartridge type: Pre-polarized condenser
Frequency range: 20 Hz – 20 kHz
Frequency range, ± 2 dB: Soft boost grid: 20 Hz – 20 kHz, 3 dB soft boost at 8 – 20 kHz. High boost grid: 20 Hz – 20 kHz, 10 dB boost at 12 kHz
Sensitivity, nominal, ±3 dB at 1 kHz: 20 mV/Pa; -34 dB re. 1 V/Pa
Equivalent noise level A-weighted: Typ. 23 dB(A) re. 20 µPa (max. 26 dB(A))
Equiv. noise level ITU-R BS.468-4: Typ. 35 dB (max. 38 dB)
S/N ratio, re. 1 kHz at 1 Pa (94 dB SPL): 71 dB(A)
Total harmonic distortion (THD) – Legacy: < 1 % THD up to 123 dB SPL peak; < 1 % THD up to 120 dB SPL RMS sine
Total harmonic distortion (THD) – CORE: < 1% THD up to 129 dB SPL peak
Dynamic range – Legacy: Typ. 100 dB
Dynamic range – CORE: Typ. 106 dB
Max. SPL, peak before clipping: 134 dB
Output impedance: 30 – 40 ohm
Cable drive capability: Up to 300 m (984 ft)
Power supply: For wireless For wireless systems: Min. 5 V – max. 50 V through DPA adapter. With DAD6001-BC/DAD6024/DAD4099: 48 V phantom power ±4 V for full performance.
Connector: MicroDot
Colour: Black, beige, brown or white
Weight: 7.5 g (0.26 oz) incl. Cable and MicroDot connector
Microphone diameter: 5.4 mm (0.21 in)
Microphone length: 12.7 mm (0.5 in)
Cable length: 1.8 m (5.9 ft)
Polarity: Positively increasing sound pressure produces positive going voltage on MicroDot pin
Temperature range: -40 °C to 45 °C (-40 °F to 113 °F)
Relative Humidity (RH): Up t 90%

Reviews

There are no reviews yet.

Be the first to review “DPA d:screet™ CORE 4060 Omni Lavalier Microphone”

Time limit is exhausted. Please reload CAPTCHA.

You may also like…