Additional Links

DPA d:screet™ CORE 4063 Omni Lavalier Microphone

DPA d:screet™ CORE 4063 Omni Lavalier Microphone (with Extreme SPL & DC) gives a bias voltage, designed for use with 3V transmitters (instead of the more common 5V).

The mic is acoustically identical to the d:screet™ CORE 4060 Miniature Omnidirectional Microphone, but the internal pre-amplifier’s input stage is designed to work with a lower supply voltage of 3 volts. With the correct power source, the microphone can handle sound pressure levels (SPLs) up to 138 dB before clipping occurs.

This mic is available in three colours: black, beige and white.

Where to buy

Product Description

The DPA d:screet™ series is the world’s leading mic for speech and vocal performance and has become the industry standard microphone in live theatre and broadcast. Now in its next evolution, the d:screet ‘CORE’ 4060 series of Miniature Omnidirectional Microphones bring extra clarity and detail to live speech and vocals, further distancing themselves from their competitors.

The DPA d:screet™ CORE 4063 Omnidirectional Lavalier Microphone was developed to withstand even the toughest of conditions in live performance, containing a 5.4 mm diameter pre-polarized condenser element with a vertical diaphragm.

The CORE by DPA d:screet™ 4063 is an omnidirectional microphone has sensitivity at all angles – which means it’s capable picking up sound equally from all directions.

A double vent protection system makes the mic greatly resistant to humidity and sweat, whilst its Kevlar-reinforced cable relief can withstand constant every-day twists, bends and pulls of any live performance. ­­Adding further flexibility, the microphone can be configured to run easily and effortlessly with a huge range of the industry’s proffered wireless systems, but if you prefer, the mics is available with an XLR adapter to run via a wired system.

DPA d:screet™ CORE 4063 Specifications

Directional pattern: Omnidirectional
Principle of operation: Pressure
Cartridge type: Pre-polarized condenser
Frequency range: 20 Hz – 20 kHz
Frequency range, ± 2 dB: Soft boost grid: 20 Hz – 20 kHz, 3 dB soft boost at 8 – 20 kHz. High boost grid: 20 Hz – 20 kHz, 10 dB boost at 12 kHz
Sensitivity, nominal, ±3 dB at 1 kHz: 6 mV/Pa; -44 dB re. 1 V/Pa
Equivalent noise level A-weighted: Typ. 26 dB(A) re. 20 µPa (max. 28 dB(A))
Equiv. noise level ITU-R BS.468-4: Typ. 38 dB (max. 40 dB)
S/N ratio, re. 1 kHz at 1 Pa (94 dB SPL): 68 dB(A)
Total harmonic distortion (THD) – Legacy: < 1 % THD up to 123 dB SPL peak; < 1 % THD up to 120 dB SPL RMS sine
Total harmonic distortion (THD) – CORE: < 1% THD up to 135 dB SPL peak
Dynamic range – Legacy: Typ. 97 dB
Dynamic range – COREy: Typ. 109 dB
Max. SPL, peak before clipping: 138 dB
Output impedance: 30 – 40 ohm
Cable drive capability: Up to 300 m (984 ft)
Power supply: For wireless systems: Min. 3 V – max. 50 V through DPA adapter. With DAD6001-BC/DAD6024/DAD4099: 48 V phantom power ±4 V for full performance.
Current consumtion: Typ. 1.5 mA (microphone). 3.5 mA with DAD6001-BC XLR Adapter.
Connector: MicroDot
Colour: Black, beige, brown orwhite
Weight: 7.5 g (0.26 oz) incl. Cable and MicroDot connector
Microphone diameter: 5.4 mm (0.21 in)
Microphone length: 12.7 mm (0.5 in)
Cable length: 1.8 m (5.9 ft)
Polarity: Positively increasing sound pressure produces positive going voltage on MicroDot pin
Temperature range: -40 °C to 45 °C (-40 °F to 113 °F)
Relative Humidity (RH): Up t 90%

Reviews

There are no reviews yet.

Be the first to review “DPA d:screet™ CORE 4063 Omni Lavalier Microphone”

Time limit is exhausted. Please reload CAPTCHA.