Additional Links

DPA d:screet™ GMK-SC4061 Gooseneck Microphone Kit

The DPA GMK-SC4061 kit contains the infallible DPA d:screet™ 4061 Omnidirectional Microphone, Lo-Sens terminated to microdot and a 15.3 cm (6 in) long gooseneck.

The 4061 has an impressive dynamic range and extremely low self-noise, making this gooseneck mic kit ideal for close miking instruments both in studio and live settings, as there is a wide array of clips available for it. If higher sensitivity is required, use the 4060 Hi-sens version.

Where to buy

Product Description

The d:screet™ 4061 Omni mic, Lo-Sens included in the GMK-SC4061 kit offers very clean, detailed and natural sound quality. Because of its tiny size, it exhibits an exceedingly accurate omnidirectional pattern and therefore does not need to be aimed directly at the sound source to achieve incredibly good results.

You can choose from DPA’s extensive range of d:vote™ clips to find the one that works best on your specific instrument. With this solution, the mic can be easily unclipped and repositioned or moved to another instrument. This leaves it up to you to decide on the correct placement to achieve the desired timbre.

The d:screet™ Gooseneck Microphone Kit is also available with d:screet™ 4061 Omnidirectional Microphone, Lo-Sens, which is ideal for close-miking instruments with our extensive range of clips.

GMK-SC4061 kit features:

  • Extremely rugged and reliable
  • Exceptional audio quality
  • Low self-noise and high sensitivity
  • Large selection of accessories
  • Modular adapter system fits most professional wireless systems

DPA d:screet™ GMK-SC4061 Specifications

Directional pattern Omnidirectional
Principle of operation Pressure
Cartridge type Pre-polarized condenser
Frequency range 20 Hz – 20 kHz
Frequency range, ±2 dB Soft boost grid: 20 Hz – 20 kHz, 3 dB soft boost at 8 – 20 kHz. High boost grid: 20 Hz – 20 kHz, 10 dB boost at 12 kHz
Sensitivity, nominal, ±3 dB at 1 kHz 6 mV/Pa; -44 dB re. 1 V/Pa
Equivalent noise level, A-weighted Typ. 26 dB(A) re. 20 µPa (max. 28 dB(A))
Equivalent noise level, ITU-R BS.468-4 Typ. 38 dB (max. 40 dB)
S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL) 68 dB(A)
Total harmonic distortion (THD) < 1% THD up to 123 dB SPL peak; < 1% THD up to 120 dB SPL RMS sine
Dynamic range Typ. 97 dB
Max. SPL, peak before clipping 144 dB
Output impedance 30 – 40 Ω
Cable drive capability Up to 300 m (984 ft)
Power supply (for full performance) For wireless For wireless systems: Min. 5 V – max. 50 V through DPA adapter. With DAD6001-BC/DAD6024/DAD4099: 48 V phantom power ±4 V for full performance
Connector MicroDot
Color Black
Microphone diameter 5.4 mm (0.21 in)
Microphone length 12.7 mm (0.5 in)
Cable length 1.8 m (5.9 ft)
Cable color Black
Polarity Positively increasing sound pressure produces positive going voltage on MicroDot pin
Temperature range -40°C to 45°C (-40°F to 113°F)
Relative humidity (RH) Up to 90%
Gooseneck length 153 mm (6 in)