Additional Links

DPA d:screet™ SMK4060 Stereo Mic Kit

DPA's d:screet™ SMK4060 is a stereo miniature mic kit combining two DPA d:screet SC4060 Omnidirectional Mic Capsules with a host of accessories including surface mounts, boundary layer mounts, clips and magnet mounts, making the SMK4060 a very powerful stereo recording kit.

Included in the SMK4060 Stereo Microphone Kit:

2 x SC4060 Omnidirectional Mic, Hi-Sens, Black, 3 meter cable
2 x BLM6000-B Boundary Layer Mount, Black
2 x DAD6001-BC MicroDot to 3-pin XLR (P48) w. Belt Clip
1 x DMM0007 Universal Surface Mount, 5 pcs.
2 x DMM0011-B Magnet Mount, Black
1 x DUA0560 Windscreen, Black, 5 pcs.
2 x MHS6005 Microphone Holder for Strings

Where to buy

Product Description

The DPA d:screet™ SMK4060 Stereo Mic Kit uses DPA’s 4060 pressure gradient omnidirectional mic capsules, offering incredibly flat frequency response and clarity to your stereo recordings. The host of accessories included make this kit highly adaptable, perfect for studio or stage recording, even binaural applications with a bit of ingenuity.

The included BLM6000 Boundary Layer Mounts are very useful for stereo recordings with the SMK4060, allowing positioning of the mic on a reflective boundary such as a floor, wall, ceiling, piano lid etc, enabling them to best capture the ambient sound of the area. The sound captured from this “pressure zone” has more detail, clarity and intelligibility when compared with sound captured from the “free air”.

The d:screet™ SMK4060 stereo mic kit is also available as the SMK4061 – with 4061 mic capsules, offering 9dB less sensitivity than the 4060 high sens version.

DPA SMK-SC4060 Stereo Mic Kit Specifications:

Directional characteristics: Omnidirectional
Principle of operation: Pressure
Cartridge type: Pre-polarized condenser element with vertical diaphragm
Frequency range, ± 2 dB: Soft boost grid: 20 Hz – 20 kHz, 3 dB soft boost at 8 – 20 kHz. High boost grid: 20 Hz – 20 kHz, 10 dB boost at 12 kHz.
Sensitivity, nominal, ±3 dB at 1 kHz: 20 mV/Pa; -34 dB re. 1 V/Pa
Equivalent noise level A-weighted: Typ. 23 dB(A) re. 20 µPa (max. 26 dB(A))
Equiv. noise level ITU-R BS.468-4: Typ. 35 dB (max. 38 dB)
S/N ratio, re. 1 kHz at 1 Pa (94 dB SPL): 71 dB(A)
Total harmonic distortion (THD): < 1 % THD up to 123 dB SPL peak; < 1 % THD up to 120 dB SPL RMS sine
Dynamic range: Typ. 100 dB
Max. SPL, peak before clipping: 134 dB
Output impedance: 30 – 40 ohm
Cable drive capability: Up to 300 m (984 ft)
Power supply: For wireless For wireless systems: Min. 5 V – max. 50 V through DPA adapter. With DAD6001-BC/DAD6024/DAD4099: 48 V phantom power ±4 V for full performance.
Connector: MicroDot
Color: Black, beige, brown or white
Microphone weight: 7.5 g (0.26 oz) incl. cable and MicroDot connector
Microphone diameter: 5.4 mm (0.21 in)
Microphone length: 12.7 mm (0.5 in)
Cable length: 1.8 m (5.9 ft)
Polarity: Positively increasing sound pressure produces positive going voltage on MicroDot pin
Temperature range: -40 °C to 45 °C (-40 °F to 113 °F)
Relative Humidity (RH): Up t 90%


There are no reviews yet.

Be the first to review “DPA d:screet™ SMK4060 Stereo Mic Kit”

Time limit is exhausted. Please reload CAPTCHA.

You may also like…