Additional Links

DPA d:screet™ SMK4061 Stereo Mic Kit

Combining two DPA d:screet™ 4061 Omnidirectional Mic Capsules with a host of accessories including surface mounts, boundary layer mounts, clips and magnet mounts makes the SMK-SC4061 a very powerful stereo recording kit.

Included in the SMK4061 Stereo Microphone Kit:

2 x SC4061 Omnidirectional Mic, Lo-Sens, Black, 3 meter cable
2 x BLM6000-B Boundary Layer Mount, Black
2 x DAD6001-BC MicroDot to 3-pin XLR (P48) w. Belt Clip
1 x DMM0007 Universal Surface Mount, 5 pcs.
2 x DMM0011-B Magnet Mount, Black
1 x DUA0560 Windscreen, Black, 5 pcs.
2 x MHS6005 Microphone Holder for Strings

Where to buy

Product Description

The DPA d:screet™ SMK4061 Stereo Mic Kit uses DPA’s 4061 pressure gradient omnidirectional mic capsules, offering incredibly flat frequency response and clarity to your stereo recordings. The host of accessories included make this kit highly adaptable, perfect for studio or stage recording, even binaural applications with a bit of ingenuity.

The included BLM6000 Boundary Layer Mounts are very useful for stereo recordings, allowing positioning of the mic on a reflective boundary such as a floor, wall, ceiling, piano lid etc, enabling them to best capture the ambient sound of the area. The sound captured from this “pressure zone” has more detail, clarity and intelligibility when compared with sound captured from the “free air”.

The d:screet™ SMK- kit is also available with the high-sensitivity SC4060 mic capsules, and in both variants without the reinforced cable relief upon specific request.

DPA SMK-SC4061 Stereo Mic Kit Specifications:

Directional characteristics: Omnidirectional
Principle of operation: Pressure
Cartridge type: Pre-polarized condenser element with vertical diaphragm
Frequency range, ± 2 dB: 20 Hz – 20 kHz ±2 dB, Soft boost grid: 3 dB soft boost at 8 – 20 kHz, High boost grid: 10 dB boost at 12 kHz
Sensitivity, nominal, ±3 dB: 6 mV/Pa: -44.5 dB re. 1 V/Pa
Equivalent noise level A-weighted: Typ. 26 dB(A) re. 20 µPa (max. 28 dB(A))
Equiv. noise level ITU-R BS.468-4: Typ. 38 dB (max. 40 dB)
S/N ratio, re. 1 kHz at 1 Pa (94 dB SPL): 68 dB(A)
Total harmonic distortion (THD): <1% THD up to 123 dB SPL peak
Dynamic range: Typ. 97 dB
Max. SPL, peak before clipping: 144 dB
Output impedance: 30 – 40 Ohm
Cable drive capability: Up to 300 m (984 ft)
Power supply: For wireless systems: Min. 5 V – max. 50 V through DPA adapter; with DAD6001: 48 V phantom power ±4 V.
Color: Black
Weight: 7.5 g (0.26 oz) including cable and MicroDot connector
Microphone length: 12.7 mm (0.5 in)
Cable length: 3 m (9.8 ft)
Cable: Black
Sensitivity selection tolerance (at 1 kHz): ± 1.5 dB

Reviews

There are no reviews yet.

Be the first to review “DPA d:screet™ SMK4061 Stereo Mic Kit”

Time limit is exhausted. Please reload CAPTCHA.

You may also like…