Additional Links

DPA d:vote™ CORE 4099 Trumpet Mic

The DPA d:vote™ CORE 4099 Trumpet Microphone is the next evolution in super-cardioid clip on microphones for trumpet and brass instruments. Part of DPA's d:vote CORE family of instrument microphones, everything about the 4099 has been designed to give you the most natural sound for your live performances.

Utilising DPA's new CORE amplifier technology, the 4099 Trumpet mic also performs very well in studio situations. With extremely low self noise, its discrete size and easy adjustment on the Trumpet allows both musicians and recording engineers more freedom in studio, with excellent results.

The d:vote CORE 4099 Trumpet microphone kit includes the Extreme SPL 4099 variation, which has a dynamic range of 109dB and can withstand up to 152dB before clipping.

Buy Now

Product Description

The d:vote™ CORE 4099 Trumpet Mic is the result of DPA’s extensive research and development into creating the ultimate microphone for live Trumpet performance and recordings. The d:vote CORE 4099 contains a highly directional capsule designed for use on stage and live settings where other instruments and monitoring may be in close proximity. Both the pick up pattern of the capsule and the mic design ensure maximum isolation of the brass instrument, with low very self-noise and high gain before feedback.

The d:vote CORE 4099 Trumpet microphone kit includes the Extreme SPL 4099 variation, which has a dynamic range of 109dB and can withstand up to 152dB before clipping. The CORE by DPA amplifier technology assists in the production of a very natural sound, both on and off axis, so that even in the unlikely event of spill, there are no unnatural harsh frequencies to deal with. Read about CORE amplifier technology here.

The mounting system is designed to securely attach the gooseneck microphone to the bell of the Trumpet or brass instrument by way of a rubber clamp which is very simple to fit, move and re-attach when required. The 4099T clip fits the microphone securely to the rim of the Trumpet and is coated with a special rubber compound to prevent surface damage.

The CORE 4099 mic for Trumpets comes with a DAD4099 XLR adapter which requires 48v phantom power, but the mic can also be used with a wireless microphone system when coupled with the correct DPA adaptor.

DPA d:vote™ CORE 4099 Extreme SPL Specifications

Directional characteristics: Supercardioid
Principle of operation: Pressure gradient
Cartridge type: Pre-polarized condenser
Frequency range: 20 Hz to 20 kHz
Frequency range, ± 2 dB, 20 cm (7.9 in) distance: 80 Hz to 15 kHz with 2 dB soft boost at 10 to 12 kHz
Sensitivity, nominal ± 3 dB at 1 kHz: 2 mV/Pa; -54 dB re. 1 V/Pa
Equivalent noise level, A-weighted: Typ. 28 dB(A) re. 20 μPa (max. 31 dB(A))
S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): 66 dB(A)
Total Harmonic Distortion (THD): <1 % up to 137 dB SPL peak
Dynamic range: 109 dB
Max. SPL, peak before clipping: 152 dB
Output impedance: From MicroDot: 30 to 40 ohm; from DAD6001: 100 ohm
Cable drive capability: Up to 300 m (984 ft) with DAD6001 XLR adapter
Output balance principle: Signal balanced with DAD6001 XLR adapter
Common Mode Rejection Ratio (CMRR): > 60 dB from 50 Hz to 15 kHz with DAD6001 XLR adapter
Power supply (for full performance): Min. 5 V to max. 50 V through DPA adapter for wireless systems; 48 V phantom power +/- 4 V with DAD6001 XLR adapter
Current consumption: Typ. 1.5 mA (microphone). 3.5 mA with DAD6001 XLR adapter
Connector: MicroDot
Color: Black
Capsule diameter: 5.4 mm (0.2 in)
Microphone length: 45 mm (1.8 in)
Cable length: 1.8 m (6 ft)
Polarity: Positively increasing sound pressure produces positive-going voltage at MicroDot pin (and pin 2 on DAD6001 XLR adapter)
Temperature range: -40 °C to 45 °C (-40 °F to 113 °F)
Relative Humidity (RH): Up to 90%
Gooseneck length: 140 mm (5.5 in)

Reviews

There are no reviews yet.

Be the first to review “DPA d:vote™ CORE 4099 Trumpet Mic”

Time limit is exhausted. Please reload CAPTCHA.