Additional Links

Quested S6R 2-Way Active Monitor

The Quested S6R is the most compact studio monitor in the range, offering a 5” low frequency driver housed in an infinite baffle enclosure. The amplifier provides 110W RMS of power to the drivers, which is split with 65W RMS to the 5” LF and 45W RMS to the silk dome tweeter.

Measuring 244mm (w) x 347mm (h) x 301mm (d), the Quested S6R monitors provide an impressive frequency response of 75Hz-20kHz (±2 dB) for carrying such a small footprint. This can be extended by adding the SB10 Sub to support the low-end frequncies.

The Quested S6R, like all Quested monitors, is built in the UK and comes with the company's 5-year Warranty. Get in touch to arrange a demo.

Compatible with the SB10R Subwoofer →

Buy Now

Product Description

The Quested S6R 2-Way Active Monitor offers an compact-but-powerful solution for studio nearfield monitoring based on Roger Quested’s impeccable studio experience and attention to detail.

The S6R is the smallest Active monitor in the S-Series and is perfect for smaller mixing and control rooms, home studios and mobile monitoring systems alike. Attenuation to the input sensitivity in +2dB (Up to +6dB) or -2dB (down to -12dB) steps is available on the rear panel of the S6R. There are also low and high frequency compensation switches which also operate in 2dB steps.

The operating range is 75 Hz – 20kHz with a +- 2db tolerance. The Quested S6R is deally suited to those with limited space and when coupled to the SB10R offers a very powerful yet compact full range monitoring solution.

Quested S6R main features

  • Compact and powerful monitor system
  • 5″ Bass driver with 1 ⅛” Silk Dome tweeter
  • Natural response throughout the frequency range
  • Frequency response 75Hz – 20kHz
  • 110W RMS Continuous power

See full specifications list for more.

The Quested S6R, like all Quested monitors, is built in the UK and comes with the company’s 5-year Warranty. Get in touch to arrange a demo.

Quested S6R Specifications

TECHNICAL SPECIFICATION

Dimensions: 170(w) x 285(h) x 240(d) mm
Weight: 7.5 kgs
Drivers: Bass cone – 1 x 130 mm (5 ”) / High Frequency soft dome – 1 x 28 mm (1 ⅛”)
Maximum SPL: 104 dB © continuous pink noise @ 1 m (116 dB © per pair RMS music)
Frequency Response: 75 Hz-20 kHz ± 2 dB
Connector: XLR and ¼ inch Jack combo socket
Impedance: 10k electronically balanced with RF filters
Wiring: Pin 1 ground Sleeve; Pin 2 hot Tip; Pin 3 cold Ring
Sensitivity: -12 dBu to +6 dBu for 96 dB SPL @ 1 m set by 10 position rotary switch on rear
Subsonic: -3dB @ 45 Hz, 24dB/oct
Ultrasonic: -3dB @ 75kHz, 4dB/oct
Crossover: 1k19
LF EQ: -2/- 4 @ 82 Hz
HF EQ: +/- 2dB @ 10 kHz

 

POWER AMPLIFIER

LF output power: 65W RMS continuous (note 1)
HF output power: 45W RMS continuous (note 1)
THD: 0.03% at levels up to 1 dB below clip, 20 Hz-20 kHz. Typ 0.005% @ 1kHz.
Hum & Noise: > -100 dB referred to clip
NOTE: The continuous rating is for a period not exceeding 5 minutes with unrestricted airflow (100 mm clearance) around the amplifier heatsinks and an ambient temperature not exceeding 30ºC.

 

INDICATORS

Power on: Front mounted green LED indicates power applied.
Clip: Red LED 2 dB before amplifier clip.

 

POWER REQUIREMENTS

Voltage: Set by internal plugs: nominal 115V or 230V @ 50-60 Hz AC 230V setting: min 160V; restricted output power: max 255V 115V setting: min 80V; restricted output power: max 127V

You may also like…