Additional Links

Quested S7R 2-Way Active Monitor

The Quested S7R 2-Way Active Nearfield Monitor offers a powerful solution for monitoring and mixing. With impressive bass extension due to its low-frequency ports, the S7R delivers a superb natural sounding image right across the frequency range.

Its power amplifier supplies 190w RMS which is split between the Silk Dome tweeter and 6.5″ bass driver; more than enough to squeeze every detail out of what you're monitoring or mixing, with plenty of headroom to spare.

The Quested S7R, like all Quested monitors, is built in the UK and comes with the company's 5-year Warranty. Get in touch to arrange a demo.

Compatible with the SB10R Subwoofer →

Where to buy

Product Description

The Quested S7R is a compact monitor with bass extension, flexible enough to handle most monitoring situations. The built in amplifier provides 190W RMS in total, split between 120W RMS to the 6.5” LF driver and 70W RMS to the silk dome tweeter. Attenuation control for input sensitivity and individual LF and HF fixed level control exists on the rear panel.

The 244(w) x 347(h) x 302(d) mm enclosure incorporates a double flared front loaded port design reducing turbulence and making it well suited for mounting against walls – a distinct advantage when space is limited.

With an operating range between 65Hz – 20kHz (+/- 2db) the low end can be extended down to 27Hz with the incorporation of the SB10R sub.

Michael Cooper (Mix Magazine) when reviewing the S7s:

The S7s sounded great placed either in vertical or horizontal orientation, and I was immediately impressed by how incredibly wide the sweet spot was (both on horizontal and vertical axes). This is a major consideration if, for example, you’re mixing on a large-format console.

Quick Features

  • Compact and powerful monitor system
  • 6.5″ Bass driver with 1 ⅛” Silk Dome tweeter
  • Natural response throughout the frequency range
  • Frequency response 65Hz – 20kHz
  • 190W RMS Continuous power

(See full specifications list for more.)

The Quested S7R, like all Quested monitors, is built in the UK and comes with the company's 5-year Warranty. Buy Now to arrange a demo.

Quested S7R Specifications

TECHNICAL SPECIFICATION

Dimensions: 244(w) x 347(h) x 302(d) mm
Weight: 11.7 kgs
Drivers: Bass cone – 1 x 165 mm (6 ½ ”)
High Frequency soft dome – 1 x 28 mm (1 ⅛”)
Maximum SPL: 107 dB © continuous pink noise @ 1 m (119 dB © per pair RMS music)
Frequency Response: 65 Hz-22 kHz ± 2 dB
Connector: XLR and ¼ inch Jack combo socket
Impedance: 10k W electronically balanced with RF filters
Wiring: Pin 1 ground Sleeve
Pin 2 hot Tip
Pin 3 cold Ring

Sensitivity: -12 dBu to +6 dBu for 96 dB SPL @ 1 m set by 10 position rotary switch on rear
Subsonic: -3dB @ 30 Hz, 24dB/oct
Ultrasonic: -3dB @ 75kHz, 4dB/oct
Crossover: 1k19
LF EQ: -2/-4 @ 65 Hz
HF EQ: +/- 2dB @ 10 kHz

 

POWER AMPLIFIER

LF output power: 120W RMS continuous (note 1)
HF output power: 70W RMS continuous (note 1)
THD: 0.03% at levels up to 1 dB below clip, 20 Hz-20 kHz. Typ 0.005% @ 1kHz.
Hum & Noise: -100 dB referred to clip
NOTE 1: The continuous rating is for a period not exceeding 5 minutes with unrestricted airflow (100 mm clearance) around the amplifier heatsinks and an ambient temperature not exceeding 30ºC.

 

INDICATORS

Power on: Front mounted green LED indicates power applied.
Clip: Red LED 2 dB before amplifier clip.

 

POWER REQUIREMENTS

Voltage: Set by internal plugs: nominal 115V or 230V @ 50-60 Hz
AC 230V setting: min 160V;
restricted output power: max 255
AC 115V setting: min 80V;
restricted output power: max 127V

 

CONSUMPTION

Quiescent: 18W
Typical use: 75W (average music)
Max: 140W (average music)
Note: 0 dBu = 775 mV into open circuit

 
This product is built to conform to the requirements for CE marking.

You may also like…