DPA d:dicate™ ST2011C

DPA d:dicate ST2011C Case

DPA d:dicate ST2011C on Snare Drum

DPA ST2011C Twin Diaphragm Cardioid Compact Pencil Microphone Stereo Pair

The DPA 2011C Twin Diaphragm Cardioid Compact Pencil Microphone Stereo Pair marks a major development in modern microphone capabilities, with each mic containing two miniature capsules housed back-to-back for greater sensitivity and very low noise floor.

The 2011C is ideal on a many sources both live and in studio, though is extremely resilient when placed on snare drums, kick drums, percussion and close-miking amp cabs.

SKU: ST2011C Category: 2011 Twin Diaphragm Cardioid Microphone Tags: cardioid, DPA Microphones, live, microphone, recording

Description
Specifications

Product Description

The DPA ST2011C Twin Diaphragm Cardioid Compact Pencil Microphone Stereo Pair is a set containing a 2011C Directional Stereo Pair with two handpicked cardioid microphones, selected on sensitivity within ±1.5 dB making several stereo principles like XY and ORTF easy to obtain.

The compact design and controlled directionality of the versatile 2011Cs make them an excellent choice for percussion, drums, spot mics for classical recording and on-stage close mics for amp cabs and live sound.

The foam design in the heavy-duty transportation box allows for fast and easy exchange of microphone/accessory inlays. The ST2011C Stereo Pair comes with a 2 year warranty (5 years on the pre-amp)

DPA ST2011C Twin Diaphragm Cardioid Compact Pencil Microphone Stereo Pair

Directional pattern	Cardioid
Principle of operation	Pressure gradient, with interference tube
Cartridge type	Pre-polarized condenser, Twin Diaphragm Capsule
Frequency response	20 Hz – 20 kHz
Frequency range, ±2 dB, at 30 cm (11.8 in)	50 Hz – 17 kHz with 3 dB soft boost at 12 kHz
Sensitivity, nominal, ±2 dB at 1 kHz	10 mV/Pa; -40 dB re. 1 V/Pa
Equivalent noise level, A-weighted	Typ. 20 dB(A) re. 20 µPa (max. 23 dB(A))
Equivalent noise level, ITU-R BS.468-4	Typ. 33 dB (max. 36 dB)
Distortion, THD < 1%	134 dB SPL RMS, 137 dB SPL peak
Dynamic range	Typ. 117 dB
Max. SPL, THD 10%	146 dB SPL peak
Rated output impedance	100 Ω
Minimum load impedance	2 kΩ
Cable drive capability	100 m (328 ft)
Output balance principle	Impedance balancing with Active Drive
Common mode rejection ratio (CMRR)	> 50 dB
Power supply (for full performance)	P48 (Phantom power)
Current consumption	2.8 mA
Connector	XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: – phase
Color	Matte black
Weight	64 g (2.3 oz)
Microphone diameter	19 mm (0.75 in)
Microphone length	92 mm (3.6 in)
Maximum output voltage, RMS	> 4 V
Polarity	+V at pin 2 for positive sound pressure
Temperature range	-40°C to 45°C (-40°F to 113°F)
Relative humidity (RH)	Up to 90%