Additional Links

DPA CORE 4060 Stereo Microphone Kit

Combining two DPA CORE 4060 Omnidirectional Microphones with a host of accessories including surface mounts, boundary layer mounts, clips and magnet mounts gives you a very powerful stereo recording kit.

Included in the CORE 4060 Stereo Microphone Kit:

2 x CORE 4060 Omnidirectional Mic, Normal SPL, Black, 3 meter cable

2 x BLM6000-B Boundary Layer Mount, Black

2 x DAD6001-BC MicroDot to 3-pin XLR (P48) w. Belt Clip

1 x DMM0007 Universal Surface Mount, 5 pcs.

2 x DMM0011-B Magnet Mount, Black

1 x DUA0560 Windscreen, Black, 5 pcs.

2 x MHS6005 Microphone Holder for Strings

Where to buy

Product Description

The DPA CORE 4060 Stereo Microphone Kit uses DPA’s CORE 4060 pressure gradient omnidirectional Microphone capsules, offering incredibly flat frequency response and clarity to your stereo recordings. The host of accessories included make this kit highly adaptable, perfect for studio or stage recording.

The included BLM6000 Boundary Layer Mounts are very useful for stereo recordings, allowing positioning of the Microphone on a reflective boundary such as a floor, wall, ceiling, piano lid etc, enabling them to best capture the ambient sound of the area. The sound captured from this “pressure zone” has more detail, clarity and intelligibility when compared with sound captured from the “free air”.

By purchasing additional DPA microdot adapters the CORE 4060 kit can be paired with any professional wireless transmitter system available.

DPA CORE 4060 Stereo Microphone Kit

Directional pattern Omnidirectional
Principle of operation Pressure
Cartridge type Pre-polarized condenser
Frequency response 20 Hz – 20 kHz
Effective frequency range ±2 dB Soft boost grid: 20 Hz – 20 kHz, 3 dB soft boost at 8 – 20 kHz. High boost grid: 20 Hz – 20 kHz, 10 dB boost at 12 kHz
Sensitivity, nominal, ±3 dB at 1 kHz 20 mV/Pa; -34 dB re. 1 V/Pa
Equivalent noise level, A-weighted Typ. 23 dB(A) re. 20 µPa (max. 26 dB(A))
Equivalent noise level, ITU-R BS.468-4 Typ. 35 dB (max. 38 dB)
Distortion, THD < 1% - Legacy 120 dB SPL RMS, 123 dB SPL peak
Distortion, THD < 1% - CORE 126 dB SPL RMS, 129 dB SPL peak
Dynamic range – Legacy Typ. 100 dB
Dynamic range – CORE Typ. 106 dB
Max. SPL, THD 10% 134 dB SPL peak
Rated output impedance 30 – 40 Ω
Cable drive capability Up to 300 m (984 ft) with DAD6001-BC XLR Adapter
Power supply (for full performance) For wireless systems: Min. 5 V – max. 50 V through DPA adapter. With DAD6001-BC/DAD6024/DAD4099: 48 V phantom power ±4 V for full performance
Connector MicroDot
Color Black, beige, brown or white
Weight 7.5 g (0.26 oz) incl. Cable and MicroDot connector
Microphone diameter 5.4 mm (0.21 in)
Microphone length 12.7 mm (0.5 in)
Cable length 1.8 m (5.9 ft)
Polarity Positively increasing sound pressure produces positive going voltage on MicroDot pin
Temperature range -40°C to 45°C (-40°F to 113°F)
Relative humidity (RH) Up to 90%


You may also like…